"real" Water Slip Decals

Make "real" Water Slip Decals with your computer, color ink jet printer,
SuperCal® Decal Paper and Last Step Decal Spray.

Using any graphic software program
Design your decals
Tip for designing Graphics for printing
on SuperCal® 5-1/2" x 8-1/2" sheet

Set your printer:
Resolution = Best
Paper = Photo Gloss
Print your decal on SuperCal® Decal Paper

Spray evenly with LAST STEP DECAL SPRAY -
until the sheet has a shine -
Let dry for 1/2 hour to an hour
One can of Last-Step Decal Spray
contains enough material to coat
15 to 20 sheets
click for Last Step Air Brush Coating information

Cut to size using a household scissors.

Place into a cup of water for 10-15 seconds.
Remove from water as soon as the thin decal film
begins to slip along backing.

Apply to clean surface - plastic, metal, ceramic,
glass, mylar balloons, candles etc.

Discard the backer material
after the decal has been removed.

Last-Step AIR BRUSH Decal Coating
for use with SuperCal Ink Jet Decal Paper

After printing your design on SuperCal Decal Paper
Air Brush two or three light coatings with Last Step Air Brush Decal Coating.
(NOTE: Last Step Decal Coating can also be poured into a pump bottle.
Then you can pump a spray to coat SuperCal Decal Paper)
Let Dry completely.
Now you are ready to cut around the image.
Place into water and apply your SuperCal Decal.

~SuperCal® Decal PROJECTS~

NEXT

SuperCal® Decal Paper and "Last Step" Decal Spray are trademarks owned by Micro Format, Inc.
SuperCal is registered in the United States Trademark and Patent Office

Wheeling, IL 60090

	Using any graphic software program Design your decals Tip for designing Graphics for printing on SuperCal® 5-1/2" x 8-1/2" sheet
Set your printer: Resolution = Best Paper = Photo Gloss Print your decal on SuperCal® Decal Paper
	Spray evenly with LAST STEP DECAL SPRAY - until the sheet has a shine - Let dry for 1/2 hour to an hour One can of Last-Step Decal Spray contains enough material to coat 15 to 20 sheets click for Last Step Air Brush Coating information
Cut to size using a household scissors.

	Place into a cup of water for 10-15 seconds. Remove from water as soon as the thin decal film begins to slip along backing.
	Apply to clean surface - plastic, metal, ceramic, glass, mylar balloons, candles etc.
	Discard the backer material after the decal has been removed.


Last-Step AIR BRUSH Decal Coating for use with SuperCal Ink Jet Decal Paper After printing your design on SuperCal Decal Paper Air Brush two or three light coatings with Last Step Air Brush Decal Coating. (NOTE: Last Step Decal Coating can also be poured into a pump bottle. Then you can pump a spray to coat SuperCal Decal Paper) Let Dry completely. Now you are ready to cut around the image. Place into water and apply your SuperCal Decal.